NetComm NP511 User Manual

500Mbps Powerline Kit with AC Pass-through - NP511
4. Connect one end of the other supplied Ethernet cable into the
Ethernet port of any device you want to connect to the Internet (PC,
set-top box, gaming console, PVR, blu-ray player etc).
5. Connect the other end of the cable into the second Powerline adapter.
6. Connect the Powerline adapter to a power point near your device.
NOTE: For best performance plug your Powerline adapters directly into the wall.
Only connect to a powerboard as a last resort as this will reduce performance.
At this point, you can plug another electrical appliance into the Powerline
adapter’s AC pass-through socket if you wish to do so.
Both adapters will take a short time to nd each other. Once they have, all
three lights on both adapters should be on.
NOTE: For best performance connect other electrical devices to the AC Pass-
through socket of the Powerline adapter. If possible, also avoid plugging
other electrical devices into the socket next to the Powerline adapter to
ensure your network performs to its full potential.

NetComm NP511 Specifications

General

Wi-Fi	-
Ethernet LAN	Yes
Damping filter	2 - 68 MHz
PowerLine standard	HomePlug AV
Security algorithms	AES
Networking standards	IEEE 1901, IEEE 802.3
Filter characteristics	-25 - -45 dB
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN (RJ-45) ports	1
Maximum data transfer rate	500 Mbit/s
Maximum operating distance	300 m
Ethernet LAN interface type	Fast Ethernet
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Product color	White
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %
Quantity per pack	2 pc(s)

Weight and Dimensions

Depth	47 mm
Width	56 mm
Height	112 mm
Weight	155 g