NetComm NTC-220 Series User Manual

NTC-220 Series Router – Firmware Upgrade Guide
9 of 10
FI01138 v. 1.0 April 2019
© NetComm Wireless 2019
Restore your settings (optional)
This section provides you with instructions to restore the saved configuration.
As mentioned in the Back up current settings section, NTC-220 series routers and their firmware upgrade files are
designed to retain your existing settings throughout the upgrade process. Unless something unusual happened
during the firmware update process, for example a power failure during the process, all your previous settings,
including your login password, will be preserved.
To restore your previously saved configuration (refer to the Back up current settings section, above) do the
following
1 Log in to the NTC-220 web user interface and select
System from the menu at the top of the screen.
2 From the
System menu on the left, select System Configuration and then Settings backup and restore from
its submenu.
3 From the
Restore saved settings section click the Choose a file button.
4 Navigate to the location of the backup file in that you had previously created. It will be in the following file
format:
ntc_220_XXXX.cfg.tar.gz
5 Select the file and click the Open button.
The button in the
Restore saved settings will change to read File Chosen and the filename of the backup file
will appear to the left of the button.
6 Click the
Restore button to begin the settings restoration process.
Note
– If when you made the backup file you had elected to make an encrypted file with a password, you will be prompted to
enter the password:
Enter the backup file’s password and click the
Submit
button to continue with the settings restoration process.

NetComm NTC-220 Series Specifications

General

Brand	NetComm
Model	NTC-220 Series
Category	Network Router
Language	English