1
NETGEAR RT311 and RT314 Gateway Routers
Version V3.20(M.01)b2 for RT311
Version V3.20(CA.1)b3 for RT314
8/18/2000
This note describes enhancements and bug fixes incorporated in an incremental release of the RT311 and
RT314 RAS software version V3.20. The enhancements and fixes are those added since the initial RAS
software release V3.20 dated 6/15/2000.
New Features Overview
Port Forwarding is Configurable Using Your Browser
A port forwarding page has been added to the Advanced configuration area of the browser-based
configuration menus.
PPPoE User Name Length Increased
Although the internal interface allows PPPoE User Names of 45 characters, the browser interface
previously only allowed 30. This has now been increased to 45 characters.
Other modifications and bug fixes
• Modify internal Menu 1: change Configure Dynamic DNS to Edit Dynamic DNS.
• Added Outgoing Authentication in Menu 11.1.
• Fixed Bug: DHCP Client renew a different IP will cause NAT connection to fail.
• Modify the FTP server’s RAS code file attribute.
• Fixed Bug: ICMP and traceroute will lose packets in NAT.
• Fixed Bug: Watchdog enable will cause backup configuration file to fail.
• Fixed Bug: Tracelog will cause system to hang.
• Fixed Bug: Dropchute will cause system crash.
• Fixed Bug: ICMP data size over 1474 will be dropped.
• Fixed Bug: Watchdog enable will cause FTP/TFTP firmware upload failure.
• Modify DDNS update mechanism. (We will save update timestamp and update IP address).
• Added “sys wdog sw on” in autoexec.net to enable hardware watchdog timer.
• Fixed Bug: Can’t access WAN IP address when DHCP changes IP address.
• Fixed Bug: Lose packets when Pinging WAN address.
• Fixed Bug: Removing DNS Server setting in Menu 3.2 will cause DNS proxy failure.
To Next Page
Need help?
General
