SECTION 1
1-2
1
1-1
1-2
PRODUCT IDENTIFICATION
Your Backhoe Loader and its major components are
identified by serial numbers and letters for recognition
in After Sales Service. The following information
provides the locations of these identification plates,
stamped numbers and examples of what can be found
on your machine.
VEHICLE SERIAL NUMBER (1), Figure 1-1.
The Serial Number is stamped on the top of the right
hand main frame, in front of the right hand loader post,
in position (1). Example: *031005017*...........
NOTE: The Serial Number and identification numbers
of components may be required by your dealer when
requesting parts or service. These numbers will also be
required as an aid to identifying the machine if it is ever
stolen. Keep them safe.
VEHICLE IDENTIFICATION PLATES (2),
Figure 1-1.
The machine identification plates are located on the
right-hand loader post, as shown at position (2). Record
the data of your machine below.
MODEL/TECHNICAL TYPE
Example: *655E.699.510.700*
UNIT SERIAL NO.
Example: *031005017*
YEAR
Example: *1995*
ENGINE IDENTIFICATION, Figure 1-2.
The engine identification information is located on the
right hand engine sump rail. Record the information
below for quick reference.
MODEL NO.
Example: *EA5*
SERIAL NO.
Example: *57018*
DATE CODE.
Example:*5J25*=5(1995),J(SEPTEMBER),25(DAY)
To Next Page
Loading...
Need help?
General
