1 - GENERAL INFORMATION
1-11
1.4.3 Units of measurement used in this manual
The units of measurement used in this manual are listed as follows:
Symbol Description
°C Degrees centigrade
A Amperes
cm Centimetres
cm3 Cubic centimetres
dB(A) Decibels
g Grammes
rpm rpm
h Hour
kg Kilogrammes
km/h Kilometres per hour
kW Kilowatts
l Litres
m Metres
m3 Cubic metres
min Minutes
mm Millimetres
N Newtons
Nm Newton metres
Pa Pascals
s Seconds
V Volts
W Watts
1.4.4 Terms used to denote direction
The following terms are used in this manual to
denote directions and parts of the tractor as
viewed from the driver seat:
- 1 - Front
- 2- Right
- 3 - Rear
- 4- Left
1 3
2
4
Fig. 1.1