Next range User Manual

Keypad Interface
Bolt Mechanism
Shared & Assigned Use Functionality
Product Guide
Set Additional Lock Features (for shared use functionality only)
5
LED Usage Indicator
When in shared use functionality, each lock can be programmed to have the LED flash or not flash while the lock is in use. The default setting is
ON (red LED flashes while lock is in use).
To turn off the LED Usage
Indicator:
Press
=` 92 `
.
The LED will flash.
While the LED is flashing,
insert the Programming Key.
A two-tone beep will be heard
and the LED will turn off.
Auto Unlock
When in shared use functionality, each lock can be programmed to auto unlock after a set number of hours. The default setting is OFF (does
not auto unlock).
To turn on Auto Unlock:
Press
= ` 9 5 `
.
The LED will flash.
While the LED is flashing, insert the Programming Key.
The LED will turn on.
While the LED is on, press the set number of hours from
1 - 9 9
then press
`
.
Two sets of two-tone beeps will be heard and the LED will turn off.
For example: Press
8 `
to set the lock to auto unlock after 8
hours.
To turn off Auto Unlock:
Press
= ` 9 4 `
.
The LED will flash.
While the LED is flashing, insert the Programming Key.
A two-tone beep will be heard and the LED will turn off.
To turn on the LED Usage
Indicator:
Press
=` 91 `
.
The LED will flash.
While the LED is flashing,
insert the Programming Key.
A two-tone beep will be heard
and the LED will turn off.
1 12 2
1a
1
2
2
1b

Next range Specifications

General

Brand	Next
Model	range
Category	Locks
Language	English