INDOOR TEMP. LOG
week
indoor temp.°C
indoor temp. log3.5
Here you can see the average temperat-
ure indoors week by week during the
past year. The dotted line indicates the
annual average temperature.
The average outdoor temperature is only
shown if a room temperature
sensor/room unit is installed.
When an exhaust air module (NIBE FLM)
is installed, the exhaust air temperature
is shown.
To read off an average temperature
1.
Turn the control knob so that the ring on the shaft with the week number
is marked.
2.
Press the OK button.
3.
Follow the grey line up to the graph and out to the left to read off the average
indoor temperature at the selected week.
4.
You can now select to take read outs for different weeks by turning the
control knob to the right or left and read off the average temperature.
5.
Press the OK or Back button to exit read off mode.
Adjust the heat pump
OVERVIEW
Sub-menus
op. mode
HEAT PUMP 4
my icons
time & date
language/ language
off
auto
plus functions
holiday setting
svenska
For the menu HEAT PUMP there
are several sub-menus. Status inform-
ation for the relevant menu can be
found on the display to the right of
the menus.
plus functions Settings applying to
any installed extra functions in the
heating system.
op. mode Activation of manual or
automatic operating mode. The status information shows the selected
operating mode.
NIBE F1255Chapter 3 | F1255 – at your service52
To Next Page
Loading...
Need help?
General
