Nice SD User Manual

EN
English – 3
The gearmotors to which this instruction booklet refers are
designed for operating sectional doors balanced with springs
or weights. If these products are to be used for different
applications, it is recommended to first discuss them with
the Manufacturer.
The declaration loses its validity if the gearmotor is modified
(e.g. wiring reversal).
• CAUTION! – This manual contains instructions and
information of fundamental importance regarding safety.
Incorrect installation could result in injuries, even very
serious. Carefully read the instruction manual before you
start working. In the case of doubt, immediately interrupt
the installation operations and contact the Nice Technical
Assistance Department to receive explanations and
clarifications.
• CAUTION! – Important instruction: this manual is to be
carefully preserved for maintenance operations and
product disposal.
• CAUTION! – According to the most recent European
laws, the doors, main doors and automatic gateways must
be made according to the rules found in Directive 2006/42/
EEC (previously 98/37/EEC, "Machinery Directive"), and
in particular must meet the EN 12445, EN 12453, EN 12635
and EN 13241-1 standards that define the preconditions
for compliance of the system including the door. In this
sense execution of all installation and wiring works, final
inspection and maintenance operations are appointed
only to skilled and appropriately qualified technicians..
• Make sure that the product is actually suitable for its
intended use before starting the installation works.
If it is not, installation must absolutely NOT be carried out.
• Thecontentsofthismanualrefertoasystemofthetype
described hereunder.
• All installation works and maintenance operations are
to be performed with the gearmotor and control device
at zero voltage. If the separation device is not visible
from the point where the control device and gearmotor
are respectively housed, place a sign with the wording
 "CAUTION! MAINTENANCE IN PROGRESS" on the
separation device before starting works.
• Thecontroldeviceis to beconnectedtoan electric line
having a good quality earth connection.
• The product is to be handled with extreme care and
caution during installation operations to prevent
contusions, blows, falls or contact with liquid substances.
Avoid exposing the product to direct flames or other
sources of heat to prevent damages, operation
disturbances or dangerous situations in general. If this is
inevitable, immediately interrupt the installation operations
and contact the Nice Technical Assistance Department.
• Do not introduce modications to product components.
Any operations not allowed might cause inconveniences,
even significant. The Manufacturer declines all
responsibility for any modification arbitrarily introduced
to the product.
• Theautomaticmaindoorswithbuilt-inpedestrianservice
door are to be equipped with a control system that
prevents the motor from starting when the pedestrian
door is open.
• The packing material of the product is to be disposed
of according to the current regulations at the place of
installation.
Instructions for use
• The product must be operated only by adults free of
physical, psychic or perceptive disabilities that have the
necessary experience and knowledge.
• Carefully pay attention to children near the door, and
prevent them from playing with it.
• Ensure that children cannot play with the xed control
devices of the door.
Keep the operation remote control of the door out of the
reach of children.
GENERAL INFORMATION
ENGLISH
SAFETY STANDARDS
INSTALLATION RULES

Nice SD Specifications

General

Brand	Nice
Model	SD
Category	Engine
Language	English