20
En
Lens care
●
Clean the lens surfaces with a blower brush. To remove dirt and smudges, use a
soft, clean cotton cloth or lens tissue moistened with ethanol (alcohol) or lens
cleaner. Wipe in a circular motion from center to outer edge, taking care not to
leave traces or touch other parts of the lens.
●
Never use thinner or benzene to clean the lens as this might damage it, result in a
fire, or cause health problems.
●
To protect the front lens element, an NC filter is recommended at all times. A lens
hood also helps protect the front of the lens.
●
When storing the lens in its lens case, attach both front and rear caps.
●
When the lens will not be used for a long time, store it in a cool, dry place to
prevent mold. Also store the lens away from direct sunlight or chemicals such as
camphor or naphthalene.
●
Do not get water on the lens or drop it in water as this will cause it to rust and
malfunction.
●
Reinforced plastic is used for certain parts of the lens. To avoid damage, never
leave the lens in an excessively hot place.
Supplied accessories
●
72mm snap-on front lens cap LC-72
●
Rear lens cap LF-1
●
Bayonet hood HB-25
Optional accessories
●
72mm screw-in filters, including circular polarizing filter II
●
Soft case CL-S2
To Next Page
Loading...
Need help?
General
