E62
Map Menu
Reference Section
4 Select Save log, and press the k button.
• The log data is saved to a memory card.
B Notes on Log Recording
• If the date and time are not set, the log cannot be recorded.
• If the date and time is changed in Time zone and date (A24, E67) in the setup menu or
Synchronize in GPS options (E57) of the map menu during log recording, log recording is
canceled.
• Log recording is paused during the operations below. Log recording resumes once these
operations are canceled.
- During continuous shooting
- During movie recording
- When connected with a USB cable
• Although the log recording time elapses based on the internal clock even if the camera battery is
removed, the log is not recorded.
• The log data is temporarily stored in the camera. New logs cannot be recorded if the log data
remains in the camera. After recording log data, save it to a memory card.
• A maximum of 36 log data events can be recorded in one day.
• A maximum of 100 log data events can be saved to a single memory card.
C To Erase Log Data
• To erase the log data that is temporarily stored in the camera, select Erase log in step 4.
• To erase the log data that is stored in the memory card, press the l button in View log (E63).
Erase log
Save log
End log
To Next Page
Loading...
Need help?
General
Weight and Dimensions
