367
U
Red-Eye Correction
This option is used to correct “red-eye”
caused by the flash and is available only with
photographs taken using the flash.
The
photograph selected for red-eye correction is
previewed as shown at right.
Confirm the
effects of red-eye correction and create a
copy as described in the following table.
Note that red-eye
correction may not always produce the expected results and may
in very rare circumstances be applied to portions of the image that
are not affected by red-eye; check the preview thoroughly before
proceeding.
To Use Description
Zoom in
N
+
Press N button
and rotate main
command dial right
to zoom in, left to
zoom out.
While
photo is zoomed in,
press N and use
multi selector to view areas of image not
visible in monitor.
Keep multi selector
pressed to scroll rapidly to other areas of
frame.
While N button is pressed, area
currently visible in monitor is indicated by
yellow border.
Press J to cancel zoom.
Zoom out
N
+
View other
areas of
image
N
+
Cancel
zoom
J
Create
copy
J
If the camera detects red-eye in the
selected photograph, a copy will be created
that has been processed to reduce its
effects.
No copy will be created if the
camera is unable to detect red-eye.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
