EasyManuals Logo

Nikon Nivo 5.C User Manual

Nikon Nivo 5.C
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
Total Station Nivo Series Instruction Manual vii
Safety
C
WARNING – Charge and use the rechargeable Lithium-ion battery only in strict accordance
with the instructions. Charging or using the battery in unauthorized equipment can cause an
explosion or fire, and can result in personal injury and/or equipment damage.
To prevent injury or damage:
Do not charge or use the battery if it appears to be damaged or leaking.
Charge the Lithium-ion battery only in a product that is specified to charge it. Be sure to
follow all instructions that are provided with the battery charger.
Discontinue charging a battery that gives off extreme heat or a burning odor.
Use the battery only in equipment that is specified to use it.
Use the battery only for its intended use and according to the instructions in the product
documentation.
Laser Safety
Nivo
2.C
is a Class 3R Laser Product in accordance with: IEC60825-1, Am2 (2001):
“Safety of Laser Products
Use of the Laser Class 3R equipment can be dangerous.
Nivo
3.C
/Nivo
5.C
is a Class 2 Laser Product in accordance with: IEC60825-1, Am2
(2001): “Safety of Laser Products”
Precautions: To counteract hazards, it is essential for all users to pay careful attention
to the safety precautions and control measures specified in the standard IEC60825-1
(2001-08) resp. EN60825-1:1994 + A11:1996 + A2:2001, within the hazard
distance *); particularly on to “Users Guide”.
C
WARNING – Only qualified and trained persons should be assigned to install, adjust and
operate the laser equipment.
C
WARNING – Areas in which these lasers are used should be posted with an appropriate laser
warning sign.
C
WARNING – Precautions should be taken to ensure that persons do not look directly, with or
without an optical instrument, into the beam.
C
WARNING – The laser beam should be terminated at the end of its useful beam path and
should in all cases be terminated if the hazardous beam path extends beyond the limit (
hazard
distance
*) of the area in which the presence and activities of personnel are monitored for
reasons of protection from laser radiation.
C
WARNING – Laser beam path should be located well above or below eye level wherever
practicable.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Nikon Nivo 5.C and is the answer not in the manual?

Nikon Nivo 5.C Specifications

General IconGeneral
BrandNikon
ModelNivo 5.C
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals