Using
A Diffuser
Place a translucent material, such as one or more
sheets of tracing paper, between the flash and subject
to diffuse light.
It
is recommended that
you
experiment
with different flash-to-diffuser distances and/or more
than one diffuser.
Use the S8-
22
on
TTL
or M mode when using a diffuser.
42
MULTIPLE
FLASH
EXPOSURES-
To
create multiple
-ex
posure "stroboscopic" effects or
paint the scene with light, use the following procedure:
1. Disconnect the flash unit from the camera body.
2. Set the camera at 8 (bulb).
3.
Push
the open-flash button
repeatedly-as
many
times
as
desired.
To Next Page
Loading...
Need help?
General
