NILES AUDIO CORPORATION – 1-800-BUY-HIFI
NILES AUDIO CORPORATION – 1-800-BUY-HIFI
INTRODUCTION
Niles HDFX High-Definition, Side-/Rear-Channel Effects, In-Wall Loudspeakers are expressly
designed for superior sonic quality in side- or rear-channel applications. They employ advanced
technology components that extract the subtle nuances in recorded music or the thunderous
action sound in a movie. HDFX loudspeakers are the perfect choice wherever quality of sound is
the most important consideration.
FEATURES AND BENEFITS
5-1/4-INCH INJECTION-MOLDED TCC WOOFER WITH
BUTYL-RUBBER SURROUND, LONG-THROW VOICE
COIL/MAGNET STRUCTURE, AND VENTED POLE PIECE
The HDFX features newly-developed woofer-cone material that combines injection-molded
polypropylene with talc, carbon, and ceramic (TCC) stiffening agents. As a result, the cone offers
extreme stiffness and light weight for accurate, dynamic response. A long-throw voice coil/magnet
structure ensures increased cone excursion to enhance low frequency response and dynamic
impact. Additionally, the woofer employs a vented pole piece for increased bass linearity and a
butyl-rubber surround for improved midrange damping and clarity as well as moisture resistance.
DUAL 2-1/4-INCH INJECTION-MOLDED TCC
FULL-RANGE DRIVERS FOR SIDE-CHANNEL EFFECTS
Dual 2-1/4-inch injection-molded TCC™ (talc, carbon, and ceramic-filled) polypropylene full-range
drivers fire to either side, providing a uniform, sound field that is ideal for special effects.
COAXIAL 1-INCH TETERON TRI-LAMINATE TWEETER
WITH FLUID-COOLING AND ULTRA-WIDE DISPERSION
FOR CLEAR AND DETAILED HIGH FREQUENCIES
The HDFX’s 1-inch Coaxial Teteron Tweeter employs a tri-laminate design consisting of an inner
textile layer, which forms the dome, a high damping layer to kill unwanted resonances, and an
outside layer of urethane to add stiffness and prevent breakup modes. The result is a transparently
clear, sweet, natural-sounding tweeter, which still maintains extended frequency response.
INSTALLER-SELECTABLE ACOUSTIC FINE TUNING
Using the baffle-mounted TREBLE/CUT and BASS/CUT controls, the installer can de-emphasize the
bass and/or treble response by 3 dB after installing the HDFX to precisely tone match the sound in
any room.
1
To Next Page
Loading...
Need help?
General
