6
EN
3 Before you start using your
pressure washer
3.2 Mounting of holder for
electric cable
1. Press the holder for electric
cable (14) on to the machine.
The holder is not standard on
all models.
3.1 Mounting of lance and
nozzle holder
3.3 Mounting of wheels (only
models including wheels)
1. Mount the wheel bracket
by pressing it into the guide
at the bottom of the ma-
chine and mounting the two
screws.
2. Mount the wheels by press-
ing them into the bracket.
1. Press the lance and nozzle
holder (12) on to the ma-
chine.
To Next Page
Loading...
