8
EN
4 Operating your pressure washer
4.1 Connection of high pres-
sure hose
1. Mount the high pressure
hose on the outlet (3).
4.2 Mounting of spray lance,
nozzles and foam
sprayer
1. Push the spray lance (6) into
the spray gun (7) and screw
it on.
2. Attach the nozzle.
4.3 Water connection An ordinary 1/2" garden hose of
min. 5 m and max. 25 m will be
suitable.
NOTE: Connection to the public
mains according to regulations.
IMPORTANT! Only use wa-
ter without any impurities. If
there is a risk of running sands
in the inlet water (i.e. from
your own well), an additional
fi lter (106411231) should be
mounted.
1. Let the water run through the
water hose before connecting
it to the machine to prevent
sand and dirt from penetrat-
ing the machine.
Note: Check that the fi lter is
fi tted in the water inlet pipe
and that it is not clogged up.
2. Connect the water hose to
the water supply by means
of the quick connector (inlet
water, max. pressure: 10 bar,
max. temperature: 40°C).
3. Turn on the water.
To Next Page
Loading...
Need help?
General
