ninjakitchen.eu
PARTS
A Sip Lid
B Carry Handle
C Blending Vessel*
D Vessel Cap*
E Blade Cover*
F Motor base with Power Blades Assembly
G USB-C Charging Cord
H Charging Port
* Blending vessel sizes and quantity, and accessories
vary by model.
CHARGING:
Charge the unit for at least 2 hours for a full
battery. LEDs will illuminate GREEN when fully
charged.
Charging port is located at the back of the
motor base. Use provided USB-C charging cord
with a 5V 3A Power Supply.
B
A
F
H
C
D
E
G
1 Remove all packaging materials from the unit. Exercise care when unpacking blade assembly, as the
blades are sharp.
2 Wash vessel, lid, and blade assembly in warm, soapy water using a dishwashing utensil with a handle
to avoid direct contact with the blades. DO NOT submerge the motor base in water when cleaning.
Exercise care when handling blade assembly, as the blades are sharp.
3 Thoroughly rinse and air-dry all parts.
BEFORE FIRST USE
IMPORTANT: Review all warnings at the beginning of this Owner’s Guide before proceeding.
NOTES:
• Handle the Power Blade Assembly by grasping around the motor base.
• All attachments are BPA free. All attachments EXCEPT the motor base are top-rack dishwasher
safe. DO NOT use a heavy cycle. Ensure lid and vessel are removed from motor base before placing
in the dishwasher. Exercise care when handling Power Blade Assembly.
Motor Base Back
To Next Page
Loading...
Need help?
General
