13
www.ninjakitchen.com
English
HOW TO STORE
1 Store the Nutri Ninja Pro upright with the blade
assembly attached to the Nutri Ninja Cup. Do not place
anything on top. Store the rest of the attachments in a
safe place where they will not be damaged and won’t
cause harm. Loosely wrap the power cord around the
cord wrap.
NOTE: Do not store blended or unblended ingredients
in the Nutri Ninja Cup with the blade assembly
attached.
RESETTING THE MOTOR THERMOSTAT
The Nutri Ninja Pro features a unique safety system
which prevents damage to the unit’s motor and
drive system should you inadvertently overload your
appliance. If the appliance is being overloaded, the
motor will stop. To reset the appliance, follow the
resetting procedure below:
1
Unplug the appliance from the electrical outlet.
2
Remove and empty the cup and ensure that no food is
jamming the Pro Extractor Blades Assembly.
3
Allow the appliance to cool for approximately 30
minutes.
4
Re-install the cup onto the base and re-plug the
appliance into the electrical outlet.
5
Proceed to use the appliance as before while making
sure not to exceed the recommended maximum
capacities.
HOW TO CLEAN
CAUTION: Make sure that the motor base is
unplugged from the power source before
inserting or removing any attachment and before
cleaning.
CAUTION: DO NOT immerse the motor base into
water or any other liquid.
1 Separate/remove all parts from each other.
2 Hand Washing: Wash the lids, Nutri Ninja
™
cups and
Pro Extractor Blades
™
Assembly in warm, soapy water.
When washing the Pro Extractor Blades Assembly, use
a dish-washing utensil with a handle to avoid direct
hand contact with blades. Handle Pro Extractor Blades
Assembly with care to avoid contact with sharp edges.
Rinse and air dry thoroughly.
Dishwasher: The Nutri Ninja cups, lids, and Pro
Extractor Blades Assembly are all dishwasher safe.
The lids and Pro Extractor Blades Assembly are top
rackf dishwasher safe. Ensure the Pro Extractor Blades
Assembly is removed from the cup before placing in the
dishwasher. care when handling Pro Extractor Blades
Assembly.
WARNING: Handle the Pro Extractor Blades
Assembly with care when washing, as the blades
are sharp. Contact with the blades’ edges can
result in laceration.
3 Wipe the motor base with a clean, damp cloth. Allow
time to dry before operation.
If the appliance needs servicing, please call customer
service at 1-877-646-5288.
Care & Maintenance
To Next Page
Loading...
Need help?
General
