Ninja BL450UK Series User Manual

www.ninjakitchen.eu
9
IMPORTANT: Make sure that the motor base is
plugged in for use.
1 Place the motor base on a clean, dry, level surface such
as a counter or table top.
2 Add ingredients to the cup.
3 Place the blade onto the cup and twist it on tightly until
you have a good seal. (Fig. 1)
4 Turn the cup upside down and place it onto the motor
base, aligning the tabs on the cup with the motor base.
Turn it clockwise, the unit is ready for use. (Fig. 2)
5 Press down on the top of the cup in short intervals to
activate. (Fig. 3)
Fig. 1 Fig. 2
Use
Fig. 3 Fig. 4 Fig. 5
ASSEMBLY PULSE REMOVAL
6 When you have reached your desired consistency, stop
the appliance by removing your hand from the cup.
Wait for the motor to stop running. Then turn the cup
anticlockwise (Fig. 4) and pull straight up to remove.
(Fig. 5)
NOTE: Do not overfill! To avoid spilling, do not add
ingredients past the Max fill line.
7 Turn the cup upright and remove the Blade Assembly
by twisting the blade assembly anticlockwise. Be sure
to store the Blade Assembly attached to an empty cup
when not in use.
8 Place the Sip & Seal
™
lid onto the cup, twist to seal and
enjoy!
9 Make sure that the motor base is unplugged when not
in use.
For best results, use short “PULSES”!

Ninja BL450UK Series Specifications

General

Brand	Ninja
Model	BL450UK Series
Category	Blender
Language	English