CUSTOMER CARE - AU: 1800 890 840
10 11
CUSTOMER CARE - NZ: 0800 002 999
Suggested Uses
HOW TO STORE
1 Store the Nutri Ninja
™
with AUTO-iQ
™
upright. Secure
the power cord underneath the base by wrapping the
cord around the cord wrap. Do not place anything on
top. Store the cups and the rest of the attachments
along side the appliance where they will not be
damaged and won’t cause a hazard.
RESETTING THE MOTOR THERMOSTAT
The Nutri Ninja
™
with AUTO-iQ
™
features a unique
safety system which prevents damage to the unit’s
motor and drive system should you inadvertently
overload your appliance. If the appliance is being
overloaded, the motor will stop. To reset the appliance,
follow the resetting procedure below:
1 Unplug the appliance from the electrical outlet.
2 Remove and empty the cup and ensure that no food is
jamming the cutting blades.
3 Allow the appliance to cool for approximately 30
minutes.
4 Re-install the cup onto the base and re-plug the
appliance into the electrical outlet.
5 Proceed to use the appliance as before while making
sure not to exceed the recommended maximum
capacities.
FILLING YOUR NUTRI NINJA
™
Start with your Fresh Fruit or Veggies. Then add any
Nuts, Seeds or Powder followed by any liquids like Juice
or Milk. More liquid can help to integrate powder. Then
add your Frozen Fruit and Ice. Remember to securely
tighten the blade and don’t overfill the cups. (Fig. 6)
HOW TO CLEAN
CAUTION: Make sure that the motor base is unplugged
from the power source before inserting or removing any
attachment and before cleaning.
CAUTION: DO NOT immerse the motor base into water
or any other liquid.
1 Separate/remove all parts from each other.
2 Clean the motor base with a damp cloth and wipe dry.
3 Place cups in the dishwasher. Place the lids and
attachments on the top rack. Use caution when
handling the blade assemblies as the blades are
very sharp.
NOTE: You may also wash the cups by filling the cup to
the “MAX” fill line with warm water and a drop of dish
washing detergent, placing the blade assembly on the
cup and pulsing a few times. Do not fill the cup more
than “MAX” fill line with water because it will overflow.
Once clean, remove the cup from the motor base. Rinse
the cup, attachment and lid under running water. Allow
all the parts to dry before storing.
If the appliance needs servicing, please call customer
service at 0800 002 999 or 1800 890 840.
Care & Maintenance
PURPOSE /
FUNCTION
SUGGESTED CUP TYPE OF FOOD
Chopping / Pulsing
500 ml
650 ml
Salsa
Leafy Herbs
Mixing
650 ml
900 ml
Batters
Dips
Sauces
650 ml
900 ml
Vinaigrettes
Salad Dressings
Simple Sauces
Frozen Blending
500 ml
650 ml
900 ml
Ice
Frozen Fruit
Ice Cream
Nutrient Juices/Smoothies
500 ml
650 ml
900 ml
Fruits
Vegetables
Leafy Greens
CAUTION: DO NOT process dry ingredients without adding liquid to the cup. This product is not intended for dry blending.
fresh fruits/
veggies
nuts, seeds,
powders
frozen fruit
ice
juices, liquids
Fig. 6
To Next Page
Loading...
Need help?
General
