15
1-877-646-5288
HOW TO CLEAN
CAUTION: Make sure that the motor base is
unplugged from the power source before inserting
or removing any attachment and before cleaning.
CAUTION: DO NOT immerse the motor base into
water or any other liquid.
CAUTION: Use caution when handling the blade
assemblies as the blades are sharp.
1 Separate/remove all parts from each other.
2 Hand Washing: Wash the containers, lids, blade
assemblies and attachments in warm, soapy water. When
washing the blade assemblies, use a dish-washing utensil
with a handle to avoid direct hand contact with blades.
Handle blade assemblies with care to avoid contact with
sharp edges. Rinse and air dry thoroughly.
Dishwasher: The containers, lids, blade assemblies and
attachments are all dishwasher safe. The lids and blade
assemblies are top rack dishwasher safe. Ensure that the
blade assemblies are removed from the containers before
placing in the dishwasher.
WARNING: Handle the Stacked Blade Assembly,
Chopping Blade Assembly and Pro Extractor
Blades
®
Assembly with care when washing, as the
blades are sharp. Contact with the blades’ edges
can result in laceration.
3 Wipe the motor base clean with a damp cloth.
Please call customer service if any servicing needs to be
performed on the appliance at 1-877-646-5288.
ADDITIONAL CLEANING INSTRUCTIONS
FOR THE NINJA PRO EXTRACTOR BLADES
®
ASSEMBLY
When washing the Pro Extractor Blades Assembly, do
not attempt to remove the seal. Removing the seal can
cause damage to the seal which can result in improper
reassembly and leaking.
If the blade seal becomes loose, please call customer
service at 1-877-646-5288.
Care & Maintenance
HOW TO STORE
Store the
Ninja
®
Kitchen System with Auto-iQ
™
Total Boost
™
upright with the blade assembly inside
the corresponding container with the lid secured on
top. Do not place anything on top. Store the rest of
the attachments in a safe place where they will not be
damaged and won’t cause harm. Loosely wrap the power
cord around the motor base
.
NOTE: Do not store blended or unblended
ingredients in the Nutri Ninja Cup with the blade
assembly attached.
RESETTING THE MOTOR THERMOSTAT
The Ninja Kitchen System with Auto-iQ Total Boost
features a unique safety system which prevents
damage to the unit’s motor and drive system should you
inadvertently overload your appliance. If the appliance
is being overloaded, the motor will stop. Allow
the appliance to cool for approximately 15
minutes. To reset the appliance, follow the resetting
procedure below:
1
Unplug the appliance from the electrical outlet.
2
Remove and empty the container and ensure that no
food is jamming the cutting blade assemblies.
3
Allow the appliance to cool for approximately 15
minutes.
4
Re-install the container onto the base and re-plug the
appliance into the electrical outlet.
5
Proceed to use the appliance as before making sure not
to exceed the recommended maximum capacities.
To Next Page
Loading...
Need help?
General
