11 12
www.ninjakit chen.com1-877-646-5288
HOW TO CLEAN
CAUTION: Make sure that the motor base is
unplugged from the power source before inserting
or removing any attachment and before cleaning.
CAUTION: DO NOT immerse the motor base into
water or any other liquid.
CAUTION: Handle the blade assemblies with care,
as the blades are very sharp.
NOTE: All jars,
lids, discs and blade assemblies are
dishwasher safe. Place the lids and blade assemblies on
the top rack only. All jars, lids and plastic components of
blade are BPA free.
1 Separate/remove all parts from each other.
2 Clean the motor base with a damp cloth and wipe dry.
3 Place the pitcher, Nutri Ninja
®
cup and bowl in the
dishwasher. Place the lids and blade assemblies on the
top rack.
OR
4 Carefully hand wash the lids, pitcher, bowl,
Nutri Ninja
cups and blade assemblies in warm, soapy water with a
soft cloth.
Please call customer service if any servicing needs to be
performed on the appliance at 1-877-646-5288.
Care & Maintenance
HOW TO STORE
1 Store the Ninja
®
Supra Kitchen System upright
with the pitcher on the motor base, Stacked Blade
Assembly inside the pitcher and lid locked on the
pitcher. Do not place anything on top. Store the
Food Processor Bowl with the Chopping Blade
Assembly inside and the lid locked on the bowl.
Store the Nutri Ninja
™
cup with the Nutri Ninja
Blade Assembly attached to the cup and all other
attachments along side the appliance or in a
cabinet where they will not be damaged and won’t
cause a hazard.
RESETTING THE MOTOR THERMOSTAT
The Ninja Supra Kitchen System features a unique safety
system which prevents damage to the unit’s motor and drive
system should you inadvertently overload your appliance.
If the appliance is being overloaded, the motor will
stop. Allow the appliance to cool for approximately
15 minutes. To reset the appliance, follow the resetting
procedure below:
1
Unplug the appliance from the electrical outlet.
2
Remove and empty the container and ensure that no
food is jamming the blade assembly.
3
Allow the appliance to cool for approximately 15
minutes.
4
Re-install the container onto the base and re-plug the
appliance into the electrical outlet.
5
Proceed to use the appliance as before making sure not
to exceed the recommended maximum capacities.
FUNCTION CONTAINER ATTACHMENT SPEED BUTTON TYPE OF FOOD
Nutri Ninja
®
Blending
Nutri Ninja Cup
Nutri Ninja Blade Assembly
Single Serve
Smoothies
Frappes
Milk Shakes
Mincing Nutri Ninja Cup
Nutri Ninja Blade Assembly
Single Serve
Onion
Garlic
Herbs
Kneading Bowl Dough Blade Assembly Dough
Bread dough
Pie dough
Pizza dough
Pretzel dough
Dough Mixing Bowl Dough Blade Assembly Dough Cookie dough
Processing
Pitcher/Bowl
Nutri Ninja Cup
Stacked Blade Assembly
Chopping Blade Assembly
Nutri Ninja Blade Assembly
Blend
Pulse
Single Serve
Pâtés
Stewed fruits
Dips
Apple sauce
Spreads
Soups*
Baby food
Emulsifying Bowl
Chopping Blade Assembly
Blend
Salad Dressings
Dips
Sauces*
Grinding Bowl
Chopping Blade Assembly
Blend Meat
Grating
Bowl
Nutri Ninja Cup
Chopping Blade Assembly
Nutri Ninja Blade Assembly
Crush
Pulse
Single Serve
Grated cheese
Bread crumbs
Spices
Chopping
Bowl
Nutri Ninja Cup
Pitcher
Chopping Blade Assembly
Nutri Ninja Blade Assembly
Stacked Blade Assembly
Pulse
Single Serve
Crush
Salsa
Vegetables
Nuts
Mixing Bowl Dough Blade Assembly Dough
Light cake mixes
Batters
Ice Crushing
Pitcher
Nutri Ninja Cup
Stacked Blade Assembly
Nutri Ninja Blade Assembly
Crush
Single Serve
Ice
Pureeing
Pitcher
Nutri Ninja Cup
Stacked Blade Assembly
Nutri Ninja Blade Assembly
Crush
Single Serve
Smoothies
Smooth soups
Milkshakes
Speed Setting & Uses
* When blending blending sauces and soups, make sure they’re cooled to room temperature first - Ninja
®
containers are not
intended for hot blending.
To Next Page
Loading...
Need help?
General
