10
ninjakit chen.com
Fig. 10 Fig. 11
4 Twist the brew-through lid clockwise onto the glass
carafe to lock into place. (Fig. 10)
5 Center the carafe below the brew basket. (Fig. 11)
NOTE: Do not place any ground coffee in the brew
basket for the first two cycles.
6 Plug the brewer into an electrical outlet.
7 Once all parts are securely in place, press the Power
button.
8 With the unit powered on, make sure the Drip Stop
toggle is set to the open position. Select the Full Carafe
size and Classic Brew setting. (Fig. 12)
9 When the cycle is complete, discard the water in the
carafe. Repeat, beginning with step 2. You are now
ready to use your Ninja Coffee Bar
®
System to brew
coffee.
Fig. 12
To Next Page
Loading...
Need help?
General
