9
1-877-646-5288
1 Place the brewer on a dry, clean, and level surface.
2 To fill the water reservoir, use the hand grips to lift it
to the right and up off the brewer. (Fig. 5) The water
reservoir lid flips open for easy filling, and the entire
lid is easily removable for quick cleaning. Add fresh,
filtered water up to, but not exceeding, the Max Fill line
(Fig. 6), then return the water reservoir to the brewer
by angling it into the holder and pushing in toward the
brewer to lock into place. (Fig. 7) Do not fill water
reservoir with anything other than water as other liquids
may damage your brewer.
3 Ensure removable filter holder and permanent filter are
nested inside the brew basket. (Fig. 8) Once in place,
slide the brew basket all the way in until you hear a
slight click. (Fig. 9)
Fig. 5
Fig. 9
Fig. 6 Fig. 7
Fig. 8
Priming Your Ninja Coffee Bar
®
System
CAUTION: Fill reservoir with water up to, but not exceeding, the Max Fill line. We recommend fresh, cool,
filtered water. Do not fill water reservoir with any other liquids such as brewed coffee, carbonated beverages,
etc. as other liquids may damage your brewer.
To Next Page
Loading...
Need help?
General
