Restore all
Security
Configuration
Restore factory sett.
Restore sett. only
Select Sel ect
Back Back
Select Restore factory sett. >
Restore sett. only.
3
OK
Security code:
Clear
Type in the security code, then select
OK.
4
OK
Restore complete
Your phone switches off and on again.
This may take longer than usual. See
15.
5
Update phone software
using your phone
You can update your phone software
wirelessly. You can also set your phone
to automatically check for updates.
You can only update your software
when using the SIM in the internal SIM
holder.
Select Menu > Settings and Device >
Device updates.
1. To check if there is an update,
select Download device software.
2. To download and install an update,
select Download device software,
then follow the instructions shown on
the phone.
The update may take several minutes.
If you encounter problems, contact
your network service provider.
Check for updates automatically
Select Automatic SW update check,
then set how often to check.
42
To Next Page
Loading...
Need help?
General
Weight and Dimensions
