Nokia 130 (2017) User Guide
Remove the memory card
Open the back cover, remove the battery, and pull the memory card out.
CHARGE YOUR PHONE
Your battery has been partially charged at the factory, but you may need to recharge it before
you can use your phone.
Charge the battery
1. Plug the charger into a wall outlet.
2. Connect the charger to the phone. When done, unplug the charger from the phone, then
from the wall outlet.
If the battery is completely discharged, it may take several minutes before the charging
indicator is displayed.
Tip: You can use USB charging when a wall outlet is not available. Data can be transferred
while charging the device. The efficiency of USB charging power varies significantly, and it
may take a long time for charging to start and the device to start functioning. Make sure your
computer is switched on.
LOCK OR UNLOCK THE KEYS
Lock the keypad
To avoid accidentally pressing the keys, use keypad lock. Select Go to > Lock keypad .
Unlock the keypad
Press , and select Unlock .
© 2023 HMD Global Oy. All rights reserved. 10
To Next Page
Loading...
Need help?
General
