Nokia 150 (2020) User Guide
Insert the memory card
1. If you have a memory card, slide it in the memory card slot.
2. Put back the battery.
3. Put back the cover.
Switch on your phone
Press and hold the power key.
CHARGE YOUR PHONE
Your battery has been partially charged at the factory, but you may need to recharge it before
you can use your phone.
Charge the battery
1. Plug the charger into a wall outlet.
2. Connect the charger to the phone. When done, unplug the charger from the phone, then
from the wall outlet.
If the battery is completely discharged, it may take several minutes before the charging
indicator is displayed.
Tip: You can use USB charging when a wall outlet is not available. Data can be transferred
while charging the device. The efficiency of USB charging power varies significantly, and it
may take a long time for charging to start and the device to start functioning. Make sure your
computer is switched on.
© 2023 HMD Global Oy. All rights reserved. 8
To Next Page
Loading...
Need help?
General
