Remove the SIM card
Press the release spring (1), and slide out the SIM card
(2).
Charge the battery
Your battery has been partially charged at the
factory. If the device indicates a low charge, do the
following:
1. Connect the charger to a wall
outlet.
2. Connect the charger to the
device.
3. When the device indicates a full charge,
disconnect the charger from the device, then
from the wall outlet.
Tip: To save energy, unplug the charger when
the battery is fully charged.
You do not need to charge the battery for a specific
length of time, and you can use the device while it is
charging. If the battery is completely discharged, it
may take several minutes before the charging
11
Get started
To Next Page
Need help?
General
