Nokia 446PRO User Manual

446F
18
GEOMETRY...
GREYSCALE...
SHARPNESS
PRODUCT INFORMATION . . .
MEMORY SETTINGS . . .
CONTRAST
MIN CONTRAST
MAX CONTRAST
BRIGHTNESS
G2
RED BLACK LEVEL
GREEN BLACK LEVEL
BLUE BLACK LEVEL
RED AMP.
GREEN AMP.
BLUE AMP.
BCL ADJUST
EXIT
00: 1280x1024 85HZ
MODEL: HP P1110
SERIAL NUMBER FI92500061
POWER ON HOURS 23
S T A N D --- B Y H O U R S 0
SUSPEND HOURS 0
ACTIVE--- OFF HOURS 0
FIRMWARE 0.19
EXIT
TYPE : O
CUSTOM COLOR: 1
DDC : EXT (24LC21)
INITIALIZE EEPROM
INIT BURN IN TEST
EXIT
GEOMETRY...
GREYSCALE...
SHARPNESS
PRODUCT INFORMATION . . .
MEMORY SETTINGS . . .
VERTICAL CONV
HORIZONTAL CONV
MOIRE
EXIT
GEOMETRY...
GREYSCALE...
SHARPNESS
PRODUCT INFORMATION . . .
MEMORY SETTINGS . . .
GEOMETRY...
GREYSCALE...
SHARPNESS
PRODUCT INFORMATION . . .
MEMORY SETTINGS . . .
00: 1280x1024 85HZ
00: 1280x1024 85HZ
00: 1280x1024 85HZ
4.2.4. Memory settings and Initializing the Replacement IC204 on SMA board
If the memory for factory adj ustments is replaced, it must be initialized. D uring initializing all memory
locations are written with approximate values. They must be updated in service mode as explained
in the chapter ’Adjustment Procedure’.
- INTIALIZE EEPROM always with using display mode no 00! (91.376 kHz/85 Hz (GTF642))
- After initializing switch OFF the monitor.
- Activate service mode as explained before.
- Select Memory settings ---menu.
- Select Monitor type O, custom color 1 and DDC (EXT (24LC21)
Caution
Initializing of a programmed memory IC deletes all user a nd factory made adjustments.
4.2.5. Storing the Adjustments
When the adjustment is ready, return to t he menu by pushing the button. Adjustement w ill be
stored automatically.
4.2.6. Exit from Service Mode
Switch off the monitor.
4.2.7. Uninstalled EEPROM
If you have uninstalled EEPROM. You can not adjust in user menu. You have to go first in service
menu and select Memory settings --- Initialize EEPROM.

Nokia 446PRO Specifications

General

Brand	Nokia
Model	446PRO
Category	Monitor
Language	English