Connectivity
90
Copyright © 2007 Nokia. All rights reserved.
Log in to PTT
Select Menu > Settings > Connectivity > PTT. PTT
automatically logs in to the service when started.
When log in is successful, PTT automatically connects to
channels that were active when the application was last
closed. If the connection is lost, the device automatically
tries to log back in until you exit PTT.
indicates a PTT connection.
indicates that PTT is set to do not disturb (DND).
Exit PTT
Select Menu > Settings > Connectivity > PTT >
Options > Exit. Log out from PTT after exiting
application? may display. Select Yes to log out and close
the service. If you want to keep the application active in
the background, select No.
Make a one-to-one call
Warning: Do not hold the device near your ear
when the loudspeaker is in use, because the
volume may be extremely loud.
1. Select Menu > Settings > Connectivity > PTT >
Options > Contacts, scroll to the contact you want to
talk to, and press the call key.
2. When the connection has been established, to talk to
the other participant, press and hold the call key while
you talk.
3. To end the PTT call, select Disconnect, or if there are
several PTT calls, select Options > Disconnect.
Answer a PTT call
If Accepted list calls is set to Notify in User settings, a
short tone notifies you of an incoming call. To accept the
call, select Accept. To silence the tone, select Silence. To
reject the call, press the end key.
Make a PTT group call
To call a group, select Options > Contacts, select
Options > Talk to many, mark the contacts you want to
call, and select OK.
Callback requests
Send a callback request
If you make a one-to-one call and do not get a response,
you can send a request for the person to call you back.
To send a callback request from Contacts, scroll to a
contact, and select Options > Send callback request.
To Next Page
Loading...
Need help?
General
