To clear the destination set for your trip, select
Stop
navigation
.
Retrieve positi
on information
Select
> Settings
> Connectivity
>
GPS data
and
Position
.
In the position view, you can
view the position information
of your current location. An estimate of the accuracy of the
location is displayed.
To save your current locati
on as a landmark, select
Options
>
Save position
. Landmarks are saved locations with more
information, and they can be
used in other compatible
applications and transferred between compatible devices
.
Trip meter
Select
> Settings
> Connectivity
>
GPS data and
Trip
distance
.
The trip meter has limited accu
racy, and rounding errors may
occur. Accuracy can also be affected by availability and quality
of GPS signals.
To turn trip distance calculation on or off, select
Options
>
Start
or Stop
. The calculated values
remain on the display.
Use this feature outdoors to receive a better GPS signal.
To set the trip distance and time and average and maximu
m
speeds to zero, and to start a new calculation, select
Options
> Reset. To set the trip meter and total time to zero,
select Restart
.
7. Write text
Traditional text input
indicates traditional text input.
and
indicate the uppercase and lowercase.
indicates the sentence case, that is, the first letter of
the sentence is written in uppercase and all the other letters
are automatically written in lowercase.
indicates
number mode.
To write text with the keypad, press a number key, 2-9,
repeatedly until the desired character is displayed. There are
more characters available for a number key than are
printed
on the key. If the next letter is
located on the same key as the
present one, wait until the curs
or is displayed, and enter the
letter.
To insert a number, press and hold the number key.
To switch between the different character cases and modes
,
press
#.
Write text
© 2009 Nokia. All rights reserved.
33
To Next Page
Loading...
Need help?
General
