Nokia 7.1 User Guide
9. Proximity sensor
10. Volume keys
11. Power/Lock key
12. USB connector
13. Microphone
14. Loudspeaker
Parts and connectors, magnetism
Do not connect to products that create an output signal, as this may damage the device. Do
not connect any voltage source to the audio connector. If you connect an external device
or headset, other than those approved for use with this device, to the audio connector, pay
special attention to volume levels.
Parts of the device are magnetic. Metallic materials may be attracted to the device. Do not
place credit cards or other magnetic stripe cards near the device for extended periods of time,
since the cards may be damaged.
INSERT OR REMOVE THE SIM AND MEMORY CARD
Insert SIM and memory card
1. Open the SIM and memory card tray: push the tray opener pin in the tray hole and slide the
tray out.
2. If you have a single-SIM phone, put a nano-SIM card in slot 1 and a memory card in slot 2
on the tray with the contact areas face down. If you have a dual-SIM phone, put a nano-SIM
card in slot 1 and either a second SIM or a memory card in slot 2 with the contact areas face
down
1
.
3. Slide the tray back in the slot. Use only compatible memory cards approved for use with this
device. Incompatible cards may damage the card and the device and corrupt data stored on
the card.
© 2020 HMD Global Oy. All rights reserved. 8
To Next Page
Loading...
Need help?
General
Weight and Dimensions
