17 — Power key
18 — Loudspeaker
19 — Camera lens
Warning: The power key (17) and metallic trim in this device may
contain nickel. It is not designed for prolonged contact with the skin.
Continuous exposure to nickel on the skin may lead to a nickel allergy.
Switch the device on and off
To switch the device on or off, press and hold the power key.
If the device prompts for a PIN or a UPIN code, enter the code (displayed as
****), and select OK.
The device may prompt you to set the time and date. Enter the local time, select
the time zone of your location in terms of the time difference with respect to
Greenwich mean time (GMT), and enter the date. See "Time and
date," p. 49.
When you switch on your device for the first time and the device is in the
standby mode, you may be prompted to get the configuration settings from
your service provider (network service). For more information refer to Connect
to support. See "Configuration," p. 58. See "Configuration setting
service," p. 12.
Standby mode
When the device is ready for use, and you have not entered any characters, the
device is in the standby mode.
Your device
20
Cyan
Magenta
Yellow
Black
file:/D:/temp/overmode/GUID-431D2638-1BD0-45C5-83AF-C38B84F5117C.20070514145238033.en1179145165145/en/1/
GUID-0114949A-2FD0-4027-894A-63EEE9257447.xml Page 20 May 14, 2007 3:20:53 PM
To Next Page
Loading...
Need help?
General
