© 2010 Nokia. All rights reserved. 5
The headset is compliant with the
Bluetooth Specification 2.1 + EDR
supporting the Headset Profile 1.1
and Hands-Free Profile 1.5. Check
with the manufacturers of other
devices to determine their
compatibility with this device.
Get started
The headset contains the
following parts shown on the title
page: storage slot with indicator
light (1), microphone (2), mute
switch (3), earpiece (4), clip (5),
answer/end key (6), and charger
connector (7).
Before using the headset, you
must charge the battery and pair
the headset with a compatible
device.
Parts of the device are magnetic.
Metallic materials may be attracted
to the device. Do not place credit
cards or other magnetic storage
media near the device, because
information stored on them may be
erased.
Charge the battery
Before charging the battery,
carefully read "Battery and
charger information".
1. Connect the charger to a wall
outlet.
2. Connect the charger cable to
the charger connector.
The red indicator light is
displayed during charging.
Charging the battery fully may
take up to 2 hours.
To Next Page
Loading...
Need help?
General
