Insert or remove SIM and memory card
INSERT SIM AND MEMORY CARD
With the phone facing down, put your fingernail in the USB connector, bend the 1.
back cover open, and remove it.
Slide the SIM card holder to the left and open it up. Put a nano-SIM card in the 2.
SIM slot with the contact area face down. Close down the holder and slide it to
the right to lock it in place.
If you have a dual-SIM phone, slide the SIM card holder of the SIM2 slot to the 3.
right and open it up. Put your second nano-SIM card in the slot with the contact
area face down. Close down the holder and slide it to the left to lock it in place.
If you have a microSD memory card, slide the card in the memory card slot.4.
Press the top edge of the back cover against the top edge of your phone, and 5.
then snap the cover into place, locking all the hooks around the edges of the
cover. ¹
Use only compatible memory cards approved for use with this device. Incompatible
cards may damage the card and the device and corrupt data stored on the card.
Warning: Do not open the battery cover, it may harm your device.
Nokia 2.1 User Guide
© 2018 HMD Global Oy. All rights reserved.
8