NordicTrack NTEL71620-INT.0 User Manual

6
PART IDENTIFICATION CHART
Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the
key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it
has been preassembled. Extra parts may be included.
M4 x 16mm
Screw
(141)–22
M10 Locknut
(133)–2
M10 x 18mm
Washer (138)–4
M4 x 12mm
Screw
(148)–2
Axle Washer
(31)–2
M10 x 45mm Hex Bolt
(119)–4
M10 x 45mm Screw
(124)–4
M10 x 70mm Bolt (130)–2
M8 x 14mm
Shoulder Screw
(122)–2
M6 x 20mm
Screw
(118)–6
M10 x 25mm Screw
(123)–8

NordicTrack NTEL71620-INT.0 Specifications

General

Brand	NordicTrack
Model	NTEL71620-INT.0
Category	Stepper Machine
Language	English