Assembly Instructions
1. Carefully remove the rollator from the NOVA box and remove all protective
packaging. Stand the rollator on all four wheels.
To unfold:
1. Push down and out on the seat support tubes until they are secured in the frame
cradles and you should hear the seat click when properly engaged (see Figure 1).
To fold:
1. Unbuckle the securing strap before moving to step 2 (see Figure 2).
2. Pull the seat strap up to disengaged the lever from the cradle under the seat (see
Figure 3).
3. Press down on the sling seat and then inward on the handles.
To remove/attach the bag
Slip the nylon loop over the end of the seat support plug. Remove one side at a time
(see Figure 4).
Figure 4
Figure 1
Figure 3
Figure 2
Unbuckle
2
To Next Page
Loading...
Need help?
General
