Warning: Failure to follow safety instruction
may cause serious injury or death.
Prior to each use, please ensure the following:
Both adjustment buttons are engaged with
the handles in a locked position.
1.
Both handles are set at the same adjustment.
2.
3
Handle and forearm adjustment
1. Press the orange release button and push the forearm
handle downward until desired height (see Figure 5 & 6).
There should be an audible click to signal that the orange
release button is fully engaged.Repeat on the other side.
2. Slide the securing strap on both sides of the handle bars
(see Figure 7).
NOTE: Do not buckle the securing strap yet.
3. Insert the handle bar with the hand brake into the
forearm handle slot. Adjust the length on the handle bar
with 6 ajustment setting guides by sliding the handle bar
in or out (see Figure 8).
Figure 8
Figure 7Figure 5 Figure 6
To Next Page
Loading...
Need help?
General
