Nova STAR Series User Manual

7
To maintain this preset position, be sure that the tension adjustment
screw locking nuts are tight against the housing and the rear wheels
(image 14).
If you are still having difficulty with your brakes, you can adjust them
by doing the following:
1. Handbrake is too loose
Loosen the tension adjustment screw locking nut and turn the screw
one full turn clockwise (as viewed from standing at the back of the
walker). If this does not correct the adjustment, repeat one full turn at
a time until you have adjusted your brakes. Make sure the locking nut
is spun tight against the housing to prevent the screw from loosening.
2. Handbrake is too tight
Loosen the tension adjust screw locking nut and turn the screw one full turn counter-clockwise (as viewed
from standing at the back of the walker). If this does not correct the adjustment, repeat one full turn at a
time until
you have adjusted your brakes. Make sure the locking nut is spun tight
against the housing to prevent the screw from loosening.
Como ajustar el freno de mano
Como ajustar el freno de mano
La información siguiente es para ayudarle con el ajustamiento del
Sistema de Frenos de Mano de NOVA. Anote: El sistema de frenos de
su nueva andadera de NOVA ha sido preajustado. Para mantener el
preajuste, asegure que la tuerca del tornillo que ajusta la tensión este
apretada contra la caja de frenos y las ruedas traseras (imagen 14).
Si aún tiene dificultades con sus frenos, puede ajustar los haciendo lo
siguiente:
1. Si el freno de mano esta muy flojo
Afloje la tuerca del tornillo que ajusta la tensión y completamente
voltee el tornillo a la derecha (se está viendo la andadera por la parte
trasera). Si esto no corrige el ajustamiento, de nuevo completamente voltee el tornillo hasta que los frenos
se ajusten. Asegure que la tuerca esté apretada contra la caja de freno para que el tornillo no se afloje.
2. Si el freno de mano está muy apretado
Afloje la tuerca que del tornillo que ajusta la tensión y completamente voltee el tornillo a la izquierda (se
está viendo la andadera por la parte trasera). Si esto no corrige el ajustamiento, de nuevo completamente
voltee el tornillo hasta que los frenos se ajusten. Asegure que la tuerca esté apretada contra la caja de freno
para que el tornillo no se afloje.
Warranty
Warning
Walker must be in a stationary position, on a level surface with the brakes locked when sitting or attempting
to sit. DO NOT scoot around or navigate the walker when in the seated position. Risk of serious damage to
the walker and serious injury or death may result if brakes are not in the locked position.
Maintenance
Check your walker periodically to make sure that the brakes are working correctly and that all of the nuts
and bolts are secure. DO NOT use the walker if the brakes are not working correctly.
Warranty Information
NOVA stands firm on our commitment to providing the highest quality products, as well as exceptional
service. This product was built to precise standards and thoroughly inspected prior to shipment. This
image 14
Cable End
Cap
Tension
Adjustment
Screw
Tension
Adjustment
Screw Locking
Nut
Mounting
Screw
Handle
Brake
Housing
imagen 14
Cable End
Cap
Tension
Adjustment
Screw
Tension
Adjustment
Screw Locking
Nut
Mounting
Screw
Handle
Brake
Housing

Nova STAR Series Specifications

General

Brand	Nova
Model	STAR Series
Category	Mobility Aid
Language	English