nuair Super Boxy User Manual

11
16ontheback.Runtheaccessoryconnecteddry
untilthereisnomoreairinthereceiver.
It is advisable to store all inflation adapters in
its housing 13, in the upper left corner of the
compressor.
It is advisable to store Remote Control in its housing
14,placedonthecompressorfront.
MAINTENANCE
Never clean the machine and its components with
solvents, flammable or toxic liquids. Us only a
damp cloth making sure you have unplugged the
compressorfromthecurrentoutlet.
Afterapprox.2 hoursofuse, thecondensatethat
has formed must be drained from the receiver.
First of all, vent all the air using the accessory
connected,asdescribedabove.Backoffventvalve
7 located underneath the compressor (switched off
beforehand) by two turns, taking care to maintain
thecompressorinaverticalposition.Afterdraining
allthewater,drawupthevalvetightly.
The compressor must be disposed in conformity
with the methods provided for by local
regulations.
INFLATION GUN
4
For inflating tires, rubber dinghies, air beds,
footballs and other objects
Never inflate the objects above the
recommended inflation pressure as this
may be dangerous and cause damage and/
or injuries.
USE
1) Connect the inflation gun 11 to the compressor
as explained in chapter “2 - CONNECTING THE
ACCESSORIESTOTHECOMPRESSOR”.
2) When inflating tires or certain bicycle tires, it is
not necessary to insert any of the adapters (fig.
5).PresstabE (fig. 3) and connect the hose of
the gun to the tire pushing the fitting on the valve
andthenreleasingthetab.
3) Inflate the tire pressing lever F (fig. 4).Release
the lever and read the pressure reached on
gauge Gofthe gun. Repeat the operationuntil
thepressurerequiredisobtained.Inthecaseof
over-inflation, press button H to reduce inflation
pressure.
Warning: do not hold down the lever too long
before checking the pressure reached as this
could cause explosion of the object being
inflated.
4) When inflating footballs, rubber dinghies,
certain bicycle tires and children’s inflatable
swimming-pools, you may have to use a suitable
adapter (fig. 6).
Adapter 8 is used for footballs
Adapter 9 is used for rubber dinghies, air beds
and children’s swimming-pools
Adapter 10 is used for certain bicycles
Select the suitable adapter and push it in the
inflation hose pressing tab E (fig. 6).Once itis
inserted, release tab E.
To secure the adapter, turn it slightly in a clockwise
direction
5)Inflatetheobjectconcernedasdescribedinpoint
3).
TIPS FOR USING THE INFLATION GUN
Use the inflation gun at least once every two weeks
in order to check that your tires are at the right
pressure; this promotes fuel economy, increases
the service life of your tires and improves safety as
it reduces braking distances and improves handling
ofthevehicle.
MAINTENANCE
Do not clean the inflation gun and adapters with
solventsorflammableortoxicliquids.
Warning: if the water that condenses is
not drained, it may corrode the receiver,
reducing its capacity and impairing safety.
As it is a contaminating product, condensate
must be DISPOSED of in accordance with
laws on protection of the environment and
current legislation.
Warning: Do not direct the jet of
compressed air towards people or animals.

nuair Super Boxy Specifications

General

Brand	nuair
Model	Super Boxy
Category	Air Compressor
Language	English