AXIS 2
- The Leader in DJ Technology
©2001 Numark Industries
- 9 -
http://www.numark.com
DISPLAY FEATURES
1.
CUE -
Flashing when the unit is setting a cue point. Lit continuously when the unit is paused at a cue point.
2. PAUSE (II)- Active when the unit is paused.
3. PLAY (>)- Active while the unit is actually playing a CD.
4. TRACK - Shows the track that the unit is playing.
5. TOTAL – indicates when total CD remaining tracks are displayed.
6.
MINUTES -
Shows the minutes elapsed or remaining depending on mode setting.
7.
SECONDS -
Shows the seconds elapsed or remaining depending on mode setting.
8. FRAMES - The CD Player breaks down a second into 75 frames for accurate cueing. This shows the frames elapsed or
remaining depending on mode setting.
9. AUTOSTART – will light when the unit is set to relay from CD unit to CD unit.
10. CONTINUOUS PLAY – Shows when the unit is set to play back the entire CD without stopping between tracks.
11. SINGLE PLAY- Shows when the unit is set to play just one track at a time.
12.
CD IN –
indicates a standard CD is in the unit.
13. TIME BAR - Shows either track elapsed time, remaining track time, or remaining total time depending on the setting of the
“time” button.
TIME MODE -
14. (Remain) indicates when track remain time is displayed.
15. (Total) indicates when total CD remain time is displayed
note: if both indications are not lit, the unit will be showing “elapsed” time
16. SEARCH – indicates when the unit is searching through the music
17.
Numeric display
- indicating either current pitch or BPM
18. PITCH - is lit when pitch is being displayed
19.
BPM – is lit when BPM is being displayed
To Next Page
Loading...
Need help?
General
