Numark DJ2GO User Manual

3
BOX CONTENTS
 DJ2GO
 USB cable
 Software CD
REGISTRATION
Please go to http://www.numark.com
to register your DJ2GO. Registering your product ensures that we
can keep you up-to-date with any new product developments and provide you with world-class technical
support, should you run into any problems.
SETUP
PC
Before you can begin using DJ2GO with your computer, you must install the included Virtual DJ LE software:
1. Please insert the included installation disc into your computer's CD-ROM drive.
2. Open the CD to view its contents.
3. Open the folder titled "PC."
4. Double-click "Setup.exe."
5. Select your preferred language and when done press "OK."
6. Read the information screen then press "Next."
7. Read the User Agreement, select "I accept the agreement," then click "Next."
8. You will be asked to choose a location to install. (We recommend using the default location for most users.)
Once you have selected the location, click "Next."
9. The installation procedure will begin. Follow the on-screen instructions.
10. Once the installation is complete, click "Finish."
To start using DJ2GO:
1. Connect DJ2GO to an available USB port on your computer. (If possible, use a USB port on the rear panel of
your computer.)
2. Open Virtual DJ LE by double-clicking the icon on your computer's Desktop (if you created a Desktop shortcut)
or by going to Start  All Programs  Virtual DJ.
For more information on how to use Virtual DJ, see the manual on the CD, located in the "Manual" folder.
MAC
Before you can begin using DJ2GO with your computer, you must install the included Virtual DJ LE software:
1. Please insert the included installation disc into your computer's CD-ROM drive.
2. Open the CD to view its contents.
3. Open the folder titled "Mac."
4. Double-click "Setup.mpkg."
5. Once you see the installer welcome screen, click "Continue."
6. Read the User Agreement, select "I accept the agreement," then click "Continue," then "Agree."
7. You will be asked to choose a location to install. By default, your hard disk will be selected. (We recommend
using this for most users.) Once you have selected the location, click "Install" to begin the installation.
8. Enter your password and click "OK."
9. Once the installation is complete, click "Close."
To start using DJ2GO:
1. Connect DJ2GO to an available USB port on your computer. (If possible, use a USB port on the rear panel of
your computer.)
2. Open Virtual DJ LE by going to Applications  Virtual DJ LE.
For more information on how to use Virtual DJ, see the manual on the CD, located in the "Manual" folder.

Numark DJ2GO Specifications

General

Brand	Numark
Model	DJ2GO
Category	DJ Equipment
Language	English