Numark MP103USB User Manual

3
BOX CONTENTS
 MP103USB
 Power cable
 Stereo RCA cable
 Quickstart Guide
 Safety & Warranty Information Booklet
REGISTRATION
Please go to http://www.numark.com to register your MP103USB. Registering your product ensures that we can keep you
up-to-date with any new product developments and provide you with world-class technical support, should you run into any
problems.
QUICK SETUP
1. Make sure all items listed in the BOX CONTENTS section are included in the box.
2. READ SAFETY & WARRANTY INFORMATION BOOKLET BEFORE USING THE PRODUCT.
3. Study the connection diagram in this guide.
4. Place mixer in an appropriate position for operation.
5. Make sure all devices are turned off and all faders and gain knobs are set to “zero.”
6. Connect all stereo input sources as indicated in the diagram.
7. Connect the stereo outputs to power amplifier(s), tape decks, and/or other audio sources.
8. Plug all devices into AC power.
9. Switch everything on in the following order:
• Audio input sources (i.e. turntables, CD players, etc.)
• Mixer
• Last, any amplifiers or output devices
10. When turning off, always reverse this operation by turning off:
• Amplifiers
• Mixer
• Last, any input devices
CONNECTION DIAGRAM
HOUSE AMP
POWER
MIXER

Numark MP103USB Specifications

General

Audio formats supported	MP3
CD-R playback	Yes
CD changer	No
Device type	-
Product color	Black
Cables included	AC
AC adapter frequency	50 / 60 Hz
AC adapter input voltage	115 / 230 V
Power consumption (typical)	20 W
I/O ports	RCA Out, XLR Out
USB 2.0 ports quantity	1

Weight and Dimensions

Depth	270 mm
Width	483 mm
Height	89 mm
Weight	4600 g