Numark NS6 Control Manual

4
Effects
The DJ effects in Serato DJ are powered by iZotope
®
.
To open the effects panel, click the FX tab in Serato DJ.
To assign an effect:
• To a specific Deck: Press the
FX SEND A or B button above
the desired channel/Deck on
your NS6. The corresponding
Deck number (1, 2, 3, or 4) will
be selected in the Deck Assign
area in Serato DJ.
Note: By default, Effect A is assigned to Deck 1, and Effect B is assigned to Deck 2.
• To the Master Output: Press the FX SEND A or B button under the
MASTER VOLUME knob on your NS6. M will be selected in the Deck
Assign area in Serato DJ.
To adjust the effect parameters:
• Use the software controls in Serato DJ.
• Use the FX MIX fader, FX PARAM knob, or either of these in conjunction with the SHIFT
button.
NS6 Controls Effects Function
FX A or B Activate/deactivate Effect A or B
FX SEND A or B Activate/deactivate effect on specific Deck
FX MIX Fader Parameter 1 (Dial 1)
SHIFT + FX A or B Parameter 2 (Button 2)
FX PARAM Parameter 2 (Dial 2)
SHIFT + FX PARAM Parameter 3 (Dial 3)
FX SELECT (tapped) Tap Tempo (Beat Multiplier)
FX SELECT (pressed and
held for 2 seconds)
Reset effect BPM (automatically sync with
Deck's BPM)
SHIFT + FX SELECT Effect scroll & select
iZotope is a registered trademark of iZotope, Inc. in the U.S. and other countries.
NS6 effects controls
NS6 FX SEND A/B
buttons (Master)
NS6 FX SEND A/B buttons (Decks)
Serato DJ FX tab

Numark NS6 Specifications

General

Sample rate	441 kHz
Channels quantity	4 channels
Digital sound processing	24 bit
MIDI out	Yes
Booth out (1/4\")	1
Dimensions (WxDxH)	603 x 340 x 64 mm

Weight and Dimensions

Weight	6330 g