Numark PPD01 User Manual

PPD01
QUICK SETUP DIAGRAM
1. Study this setup diagram.
2. Make sure all faders are at “zero” and all devices are
off.
3. Connect all stereo input sources, your microphone,
and monitor headphones
4. Connect the stereo outputs to the power amplifier(s)
and/or audio sources.
5. Plug your mixer and other devices into AC power.
6. Switch everything on in the following order.
• audio input sources (i.e. turntables or CD players)
• your mixer
• last, any amplifiers
7. When turning off, always reverse this operation by,
• turning off amplifiers
• your mixer
• last, any input devices
- The Leader in DJ Technology
©2002 Numark Industries - 10 - http://www.numark.com

Numark PPD01 Specifications

General

Brand	Numark
Model	PPD01
Category	Music Mixer
Language	English