SETUP & INSTALLATION
This turntable has been designed exclusively for DJ use and can be setup in a variety of different ways depending on
your mixing style. The turntable should rest on a level and stable surface that is clear of obstructions. If a mixer is
placed between two turntables make sure that there is at least ¼" (7mm) between the mixer and the turntables to
prevent damage to the turntables and to reduce unwanted system noise.
Mixer
85 mm
Mixer
Setup Style 1 (traditional)
Best For:
Long mixes and blending
techniques
Mixer
¼" ¼"
¼" ¼"
Setup Style 2 (battle style, scratching)
Best For:
Scratching, cutting, and aggressive
mixing techniques
Mixer
There are many variations of these setups. Find the best setup that works for your mixing style by experimenting with
different turntable and mixer placements. It is strongly recommended that the top mixer surface and the top flat surface
of the turntable be at the same level.
PAGE 3 SETUP AND INSTALLATION
To Next Page
Loading...
Need help?
General
