O2 Xda Argon User Manual

2
3
1. Install the SIM card
Turn off your Xda Argon before
you insert the SIM card. Then
remove the battery by pressing
the battery release button and
sliding the battery cover down.
If the battery is inside, you can
remove it with your finger by
lifting the bottom right side of
the battery.
Place the SIM with the metal
contacts faced down as
indicated and slide the SIM
card into the slot.
2. Install and charge
the battery
You new battery will be partially
charged. You will need to install
and fully charge it before you
start using your Xda Argon.
To install the battery, first
remove the battery cover and
insert the battery. Make sure
that the gold connectors on the
battery meet with the row of
connectors on the top right
side of the battery slot.
Insert the top side of the battery
first, then gently push it down
into place. Replace the battery
cover by sliding it back until it
clicks into place.
Getting started
O2 Argon_Quickguide.indd 2-3 7/3/07 15:29:19

O2 Xda Argon Specifications

General

Brand	O2
Model	Xda Argon
Category	Cell Phone
Language	English