TO MEASURE INTERMEDIATE TIME:
1. Press button “A” to start timing.
2. Press button “B” to pause the chronograph hands.
Although the chronograph hands are no longer
moving, time is still being measured.
3. Press button “B” again to move the chronograph
hands to the currently running time total.
Continue to use button “B” to pause the chrono-
graph hands when desired.
4. While the chronograph hands are moving, press
button “A” to fully stop timing and display the total
measured time.
(Pressing button “A” while the chronograph hands
are stopped allows you to display a second total
time, as described on the following page.)
5. Use button “A” to restart and stop timing as
desired.
6. While timing is stopped, press button “B” to reset
the chronograph hands to the zero position.
To Next Page
Need help?
General
