27 – C610/C711 User’s Guide
How to Change the Settings:
Administrator __________________
You can set whether to ENABLE or DISABLE each category in the
user menu.
Disabled categories are not displayed in the User’s menu. Only a
system administrator can change these settings.
1. Turn OFF the printer. Turn ON the printer while pressing the
Enter button.
When Boot Menu appears, take your finger off the button.
2. Press the Enter button.
3. At the Enter Password prompt, enter the 4-9 digit Admin
password:
(a) Using the up and down MENU buttons, scroll to the
required letter/digit.
(b) Press the Enter button to input and move to the next
letter/digit.
(c) Repeat steps (a) and (b) until all letters/digits are
entered.
Enter your 4 to 9 digit password. (The default password is
aaaaaa).
4. Press the Enter button.
5. Press the up or down MENU button until the “category” you
want to change is displayed.
6. Press the Enter button.
7. Press the up or down MENU button until the “item” you want
to change is displayed.
8. Press the Enter button.
9. Using the up or down MENU button, identify the parameter
as required.
10. Press the Enter button to enter an asterisk (*) on the right
side of the setting selected.
11. Press the On Line button to switch to online. The machine
will automatically re-boot.
To Next Page
Loading...
Need help?
General
