Oki C710dn Handy Reference

14
Power Save Mode
Power Save sets how long the
printer waits before going into
standby mode.
Setting the Power Save
Interval
1. Press E NTER .
2. Press the down arrow to move
down to
Menus . Press E NTER .
3. Press the down arrow to move
down to
System Adjust . Press
E
NTER .
4. Press E
NTER to select Power Save
Time
.
5. Press the down or up arrow
key to highlight the value you
wish to select (5, 10. 15, 30
[default], or 60 minutes).
Press E
NTER .
6. Press O
N L INE .
Disabling Power Save
The printer comes set for Power
Save enabled.
Note
A password is required to
access this area of the printer
menu. If you have a System
Administrator, only they can
disable or enable Power Save.
1. Turn OFF the printer.
2. Turn ON the printer while
holding down the E
NTER key.
3. When
Boot Menu appears on the
display, take your finger off the
key. Press E
NTER .
4. When
Enter Password appears,
enter the administrative
password (the default
password is aaaaaa).
a. Press the up arrow key (a to
z, 0 to 9) or the down arrow
key (9 to 0, z to a) to scan
through the various
numbers and letters of the
alphabet.
b. Press E
NTER .
c. Repeat a and b above for
each digit of the password.
5. Press E
NTER .
6. Press the down arrow key to
move down to
Power Setup .
7. Press E
NTER to select Power Save .
8. Press the down arrow key to
move down to
Disable . Press
E
NTER .
9. Press the B ACK key.
The printer will automatically
re-boot.

Oki C710dn Specifications

General

Brand	Oki
Model	C710dn
Category	Printer
Language	English